HP vs80 - Manual (Page 48)

48 Autoloader Administration Chapter 3
Running the Autoloader System Test
Caution Running the system test for extended periods of time will reduce
the life of your autoloader. To maximize product life, use only
when necessary.
The System Test option cycles the autoloader through the process of loading,
calibrating, and unloading all cartridges in the carousel. Running a System
Test verifies the operational soundness of the autoloader and tape drive. The
System Test continues indefinitely until you press the [Cancel] button. All
regular backup or restore operations are suspended while a System Test is in
progress.
To run a System Test:
1. From the Home Screen or main menu, press the [+] or [-] button until
Diagnostic appears on the top line of the LCD screen.
2. Press the [Enter] button to select. System Test will now be displayed.
3. Press the [Enter] button to begin the test.
The Test Count displays the number of load-calibrate-unload cycles that
have been completed during the test.
4. Press the [Cancel] button to end the test.