HP vs80 - Manual (Page 31)

Chapter 2 Operating the Autoloader 31
Figure 12 Importing a Cartridge
Exporting Cartridges
Caution Performing an import or export of media during a data backup
may result in adverse results, which could include backup failure
or other errors.
This option moves a cartridge from a specific slot to the mailslot. To export one
or more cartridges from the autoloader, follow these steps:
1. From the Home Screen or main menu, press the [+] or [-] button until
Commands appears on the top line of the LCD screen. Press [Enter].
2. Press the [+] or [-] button until Export appears on the LCD screen. Press
[Enter].
3. Press the [+] or [-] button until the desired slot number appears on the LCD
screen. Press the [Enter] button. You are not given the option to export
from an empty slot.
4. When Remove Cartridge appears on the LCD screen and the cartridge is
ejected through the mailslot, remove the exported cartridge from the
autoloader, and press the [Enter] button.
5. Repeat steps 3 and 4 as needed for any additional cartridges.
6. Press
the [Cancel] button to return to the Home screen when you are done
exporting cartridges.
7. Make sure the Home screen indicates that the desired slots contain
cartridges.