HP INTEGRITY RX3600 - Manual (Page 54)

Installation Sequence and Checklist
Table 3-1 lists the server installation steps. Follow these steps in sequence to install the server.
Table 3-1 Installation Sequence Checklist
Completed Description Step
Unpack and inspect the server shipping container. Inventory the contents using the packing
slip. 1
Install additional components shipped with the server. 2
Install the server into a rack or pedestal mount. 3
Connect cables to the server. 4
a. Connect ac input power cable.
b. Connect LAN core I/O cable.
Set up the console. 5
Access the host console. 6
Power on the server. 7
Configure core I/O cards. 8
Boot the operating system. 9
Verify the server configuration. 10
Unpacking and Inspecting the Server
This section describes procedures you perform before installation. Ensure that you have adequately
prepared your environment for the new server and received all the components you ordered.
Verify that the server and its containers are in good condition after shipment.
This section addresses the following topics:
• “Verifying Site Preparation” (page 54)
• “Inspecting the Shipping Containers for Damage” (page 55)
• “Unpacking the Server” (page 55)
• “Checking the Inventory” (page 55)
• “Returning Damaged Equipment” (page 55)
• “Unloading the Server with a Lifter” (page 55)
Verifying Site Preparation
Verifying site preparation is an essential part of a successful server installation. It includes the
following tasks:
• Gather LAN information. Determine the IP addresses for the iLO 2 MP LAN and the system
LAN.
• Establish a method to connect to the server console. For more information on console
connection methods, see
“Console Setup” (page 80) .
• Verify electrical requirements. Ensure that grounding specifications and power requirements
have been met.
• Validate server physical space requirements.
• Confirm environmental requirements.
For more information on server electrical, physical space, and environmental requirements, see
the HP Integrity rx3600 Server Site Preparation Guide and the Generalized Site Preparation Guide.
54 Installing the System