Hand Held Products Dolphin 7200 - Manual (Page 30)

4 - 2 Dolphin® 7200 User’s Guide
Sending and Receiving Data
The Dolphin 7200 RS-232 terminal can be connected to a host computer to send and receive data via the micro-DB9 RS-232
port using the YX.EXE Utility or the Dolphin File Transfer Program.
1. Insert a battery pack into the battery well of the terminal.
2. Insert the micro-DB-9 RS-232 connector to the Dolphin communication (only) cable into the micro-DB-9 port on the back of
the Dolphin 7200 RS-232 terminal.
3. Connect the DB-9 connector to your PC's serial port.
4. Run the YX.EXE utility or the Dolphin File Transfer Program.
For more on sending and receiving data using YX.EXE and the Dolphin File Transfer Program, see the section on Transferring
Files to or From Dolphin in Chapter 9.