Hand Held Products Dolphin 7200 - Manual (Page 42)

6 - 6 Dolphin® 7200 User’s Guide
yx /m
yx /c2
The default baud rate for the YX.EXE utility is 9600. For your convenience, batch files are included on the Dolphin terminal to
make sending data at a higher baud rate easier.
Note: When using YX on the Dolphin 7200 terminal, only COM1 is available.
To send at 38400, enter YF instead of YX/b38400 .
To send at 57600, enter YFF instead of YX/b57600 .
For more information, see Using the YX.EXE Utility on page 6-9.
ZZZ.EXE
ZZZ.EXE is a DOS command line utility for Dolphin that places the terminal into sleep mode.
Note: The terminal can not be placed in sleep mode while it is in the HomeBase. While in a HomeBase, the terminal must be
on so it can monitor the battery status.
ROM Image
The following Utilities are included in the Dolphin ROM image and are automatically loaded when the terminal boots. They are
NOT included on the Dolphin OS and Development System Disk.
Utility Description
EVS.EXE
Enhanced Video System (EVS) is a TSR that traps standard video BIOS (INT 10H) calls,
and overlays hardware-specific support for the Dolphin's LCD. In addition, EVS provides
application and system level Status line support.
POWERMON.EXE
POWERMON.EXE is a TSR that monitors battery status and power usage and is loaded
when the terminal boots.