Hand Held Products Dolphin 7200 - Manual (Page 98)

C - 4 Dolphin® 7200 User’s Guide
Centering Window
Press F2 for the Centering Window and the screen below will display.
This is the default setting for the Centering Window function. The Centering Window is used to keep the image engine from
decoding the wrong symbol when you have several bar codes located close together.
The following key presses configure this feature:
The decoder will only decode a target if it is inside the area defined by the Centering Window.
Centering Window Example
F1 Enables or disables centering window function
F2 Cycles the window setting through several predetermined sizes
F3 Sets to default settings
F4 Quit without saving
H Help
ENTER Save settings
DISABLED!!!!
Press: H for Help
Enter to save