Using the hp setup program – HP KAYAK XU800 User Manual
Page 40
Configuration Problems
Using the HP Setup Program
40
Using the HP Setup Program
The Setup program allows you to view and change the configuration of
your PC Workstation, such as the passwords and boot device order.
Follow these instructions to check the configuration.
First, Turn On or Restart
Your PC Workstation
If your PC Workstation is off, turn on the display and then the PC
Workstation.
If the PC Workstation is already turned on, save your data, exit all
programs and restart your PC Workstation. For Windows NT 4.0,
Windows 95 or Windows 98, use the
Shut Down
Õ
Restart your computer
command in the
Start
menu. This command will automatically exit the
operating system and restart the PC Workstation.
To Go to the Setup
Program
To go into the Setup program, press
F2
while the “Kayak” logo appears
on your display.
Yits.bok Page 40 Friday, December 17, 1999 11:33 AM