Hamilton Beach Summit Series - Manual (Page 15)

Caring for the Blender
15
Replacement Parts
32 oz.0.95 L Polycarbonate jar and cutter assembly
(includes cover/filler cap)
Quiet Shield™ sound enclosure
Description . . . Part Number . . .
6126-91515
QS916
Refer to “Requesting Assistance or Service” to order parts below.
Maintenance
Unplug the blender and remove the jar from the base, and then inspect the jar
and cutter assembly for wear, nicks, or broken blades. Replace if necessary.
See “Replacement Parts”. If the cutter assembly blades are loose,
discontinue use immediately. Do not attempt to repair or tighten the cutter assembly.
Unplug the blender, and then inspect the power cord insulation and power plug
for cracks. Inspect sealing gasket for cracking and leaking of fluids under unit.
Refer to “Requesting Assistance or Service” for repair or replacement.
Replace the jar and cutter assembly at least once a year or sooner if the cutter assembly
appears worn or damaged. See “Replacement Parts”.
Inspect the blender and its various parts and replace as follows:
Daily
Weekly
Yearly
NOTE: Do not operate this blender if it malfunctions or is dropped or damaged in any manner.
Return blender to the nearest authorized service facility for examination, repair, or electrical or
mechanical adjustment.
A-840083400B-ENv01 11/30/01 3:57 PM Page 15