HP Pavilion PE4200N - Manual (Page 17)

Conn
ectin
g
Connecting 9
Connecting
Connecting the Antenna
The Ant In mode must be set to Antenna. For more information, see “Auto program” on page 23 or “Auto program” on
page 38.
Connecting a Cable Box
■ For reception of cable channels (01–135),
connect the cable supplied by your local cable
company. The Ant In mode must be set to Cable
see “Auto program” on page 23 or “Auto
program” on page 38. ■ Certain cable systems offset some channels to
reduce interference or view Premium (scrambled)
channels. A cable converter box is required for
proper reception. Check with your local cable
company for its compatibility requirements.
■ Set the TV channel to CH3 or CH4 when using this
connection.
Connecting a cable box:
ANT
ANT
Back of the TV
Antenna Terminal
F-type Antenna Connector
VHF Antenna UHF Antenna
Mixer
75-Ohm Coaxial Cable
(5C-2V or higher specification)
ANT
ANT
OUTPUT INPUT CABLE BOX
Back of the TV
(5C-2V or higher specification
Incoming 75-Ohm Cable
from Cable Company
Aladdin_01.fm Page 9 Wednesday, June 29, 2005 2:19 PM