Connecting the amplifier, Procedure, Connecting – HP Pavilion PE4200N User Manual
Page 21: Adjust the amplifier volume to the desired level
Conn
ectin
g
Connecting
13
Connecting the Amplifier
For a full home theater sound experience, an external
Dolby Digital* decoder and a multichannel amplifier
must be connected to the Digital Audio Out terminal on
the TV.
*Dolby Digital 5.1 channel surround sound delivers digital-quality
sound. Dolby Digital provides five discrete full bandwidth channels
for front left, front right, center, surround left and surround right, plus
a LFE (Low Frequency Effect) subwoofer channel.
Procedure
1
Select Off for Speakers Off in Audio menu (see
“Speakers” under “Other Adjust (Audio)” on
page 32).
2
Adjust the amplifier volume to the desired level.
n
The S-video input overrides the composite
video signal when S-video cable is
connected. Connect either S-video cable or
video cable.
L
R
OUTPUT
AUDIO OUT
S E R V I C E O N L Y
ANT
R L
AUDIO IN
S VIDEO
VIDEO
L
R
Y
VIDEO
AUDIO
P
B
P
R
P
B
P
R
Y
Y
PROGOUT
COMPONENT VIDEO
INPUT
1
2
INPUT 2
INPUT 1
TO AUDIO AMP
D I G I T A L
A U D I O O U T
L
R
OPTICAL IN
D I G I T A L
A U D I O O U T
AUDIO INPUT
R
L
Back of the TV
Amplifier
Optical digital audio cable
Audio cable
or
n
■
Depending on your DVD player and
DVD-audio software, the copyright
protection function may operate and
disable optical output.
■
External speakers cannot be connected
directly to Output terminals.
■
With an ATSC channel, the output from
the Digital Audio Out is Dolby Digital.
With an NTSC channel, the output is PCM.
mb5poetv.book Page 13 Wednesday, June 29, 2005 12:42 PM