HP Pavilion PE4200N - Manual (Page 64)

56 HP Pavilion Plasma TV User’s Guide
Searching for the device code
If your device does not respond to the remote control
after trying all codes listed for your brand, or if your
brand is not listed at all, try searching for your code.
1 Turn on your home entertainment device.
2 Hold down a device button on the remote control
for 5 seconds until the device button blinks, and
then release the device button. The device button
blinks one more time and then remains lit.
3 Enter 1, 1, 1, 1, and the device button blinks once
and then remains lit.
4 Press and release the Power button once on the
remote control. Wait until the device button stops
blinking. Continue to press and release the Power
button, waiting each time for the device button to
stop blinking, until the home entertainment device
turns off.
5 Once the home entertainment device turns off,
press the Select button on the remote control to
save the code.
Manufacturer’s codes
The following charts include manufacturer codes for
these home entertainment devices:
■ VCR
■ DVD/VCR combo
■ Home Theater in a Box
■ DVD
■ Cable Box
■ Satellite Box
■ Satellite receiver/recorder
■ Amplifier
■ Audio Cassette
■ Audio System
■ Phono
■ Receiver/Tuner
■ PVR
n
Each time you press the Power button it is
trying a different code. Be sure to wait until
the device button stops blinking before
pressing the Power button again. You may
need to press the Power button several
times before the correct code is found.
mb5poetv.book Page 56 Wednesday, June 29, 2005 12:42 PM