Hitachi SINGLE-BAND PCS PHONE SH-P300 - Manual (Page 117)

Section 2: Understanding Your Phone
108 2H: Personal Organizer
Specifying Data
You can specify which functions can use the data being played back. (See
“Data That Can be Managed in Data Folders” on page 105.)
Specifying the functions that can use data:
1. Press (the center of the cursor key) while the data is being
played back.
2. Highlight the function you want to assign to the data and press .
Depending on the selected function, one of the following operations is
performed:
ᮣ Wallpaper: If the image data is more than 120 pixels wide and 130
pixels high, move the cursor key to select the section of the image that
will be displayed. Then press
.
ᮣ Phone Book (Images) : If the image data is more than 120 pixels wide
and 64 pixels high, move the cursor key to select the section of the
image that will be displayed. Then press
.
ᮣ Phone Book (Ringer & Audio) : Find the entry you want to set (See
“Finding Internal Phone Book Entries” on page 82) and press .
ᮣ Alarm: Highlight the entry you want to set and press .
Deleting the Data Settings
To delete the data settings:
1. Press while the data to be deleted is being played back.
2. Select the function to be deleted and press .
3. For Phone Book entries or Alarms, select the entry you want to be
delete and press
.
Tip: When you cancel the settings for a function, the function settings
revert to their default values.
Apply
OK
Apply
Apply
OK
OK
Apply
Remove
OK