Hitachi SINGLE-BAND PCS PHONE SH-P300 - Manual (Page 49)

Section 2: Understanding Your Phone
40 2B: Changing Your Phone’s Settings
Changing the Backlight Settings
Setting the backlight for the display, cursor key and numeric buttons.
Changing the Bright Time
The backlight setting lets you select how long the display screen and
keypad are backlit after any key press is made.
To change the backlight setting:
1. From the Standby mode, press the center of the cursor key to display
the top menu.
2. Select the Settings icon and press .
3. Highlight Display and press .
4. Highlight Backlight and press .
5. Highlight Bright Time and press .
6. Highlight your desired option Enter Time , 30min or OFF and press
.
7. If you choose Enter Time , enter a number from 1 to 60 seconds for the
length of time the backlight will stay lit and press .
Note: Long backlight settings affect the battery’s talk and standby times.
Setting the Backlight Light Sensor Control
This feature turns on the backlight, according to surrounding light
levels.
Follow these steps:
1. From the Standby mode, press the center of the cursor key to display
the top menu.
2. Select the Settings icon and press .
3. Highlight Display and press .
4. Highlight Backlight and press .
5. Highlight Light Sensor and press .
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK