Hitachi SINGLE-BAND PCS PHONE SH-P300 - Manual (Page 30)

Section 2: Understanding Your Phone
21 2A: Your PCS Phone – The Basics
Removing the Battery
Follow these easy steps, to remove the battery:
1. Make sure the power is off so that you don’t lose any stored numbers or
messages.
2. Push the lock button in direction A to unlock the battery cover. Grasp
the cover on both sides next to the mark where it sticks out and remove
the lid as in B.
3. Hold the battery and pull it up and out.
Charging the Battery
Your PCS Phone comes with a rechargeable battery. You should charge
the battery as soon as possible so you can begin using your phone.
Keeping track of your battery’s charge is important. If your battery level
becomes too low, your phone automatically turns off and you will lose all
the information you were just working on. For a quick check of your
phone’s battery level, glance at the battery charge indicator located in the
upper-right corner of your phone’s display screen. If the battery charge
gets too low, the blank battery icon starts blinking, and the phone sounds
a warning tone.
Always use a Sprint-approved travel charger, the optional desktop charger
or the optional vehicle power adapter to charge your battery.
B
A