Hitachi SINGLE-BAND PCS PHONE SH-P300 - Manual (Page 125)

Section 2: Understanding Your Phone
116 2I: Using Your Phone’s Voice Services
Using Voice-Activated Dialing
In addition to Voice Command SM (see page 177), you can use a Voice Dial
tag to automatically dial a phone number stored in your PCS Phone.
Your phone can store up to 20 Voice Dial tags.
To use a Voice Dial tag to call a phone number:
1. From the Standby mode, press
T.
2. Follow the voice prompts, and recite the entry’s Voice Dial tag into your
phone’s microphone.
Programming Voice Dial Tag to Your Phone
You can program up to 20 Voice Dial tags.
To program a voice dial tag:
1. From the Standby mode, press to display the main menu.
2. Highlight Voice Services and press .
3. Highlight Voice Dial and press .
4. Highlight Program and press .
5. The phone will prompt you to say the name you want to program.
Wait for the beep and then say the name.
6. Respond to the prompt by repeating the name after the beep.
7. Enter a phone number and press .
Note: Record Voice Dial tags in a quiet environment and without the aid
of an accessory.
Menu
OK
OK
OK
Save