Hitachi SINGLE-BAND PCS PHONE SH-P300 - Manual (Page 53)

Section 2: Understanding Your Phone
44 2B: Changing Your Phone’s Settings
4. Highlight Illumination and press .
5. Highlight Bright Speed and press .
6. Highlight your desired bright speed and press .
Editing the Blink Pattern
To edit your original illumination blink pattern:
1. From the Standby mode, press the center of the cursor key to display
the top menu.
2. Select the Settings icon and press .
3. Highlight Display and press .
4. Highlight Illumination and press .
5. Highlight Edit Pattern and press .
6. Highlight an original pattern you wish to edit and press .
The color that will illuminate is displayed in a list from the top.
7. Move the cursor key upward or downward to select the color you want
to change.
8. Move the cursor key left or right to select your desired color.
9. Repeat step 7–8. When finished editing, press .
Setting the Location Information
This settings allow you to decide whether you want your phone’s GPS-
enabled Position Location feature activated for optional location-based
services offered on the Sprint Nationwide PCS Network. If you choose to
disable the option, the Sprint Nationwide PCS Network cannot determine
your location using the Position Location feature. This feature is
automatically enabled when an emergency call is placed, then turned
back off when the call is completed.
To enable Position Location:
1. From the Standby mode, press the center of the cursor key to display
the top menu.
2. Select the Settings icon and press .
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK