HP 3100C - Manual (Page 24)

The configuration process 23
To add HP JetSend-enabled devices
As a convenience for your users, you can add the addresses of
HP JetSend-enabled printers used in your office. Users can then
select from a list of HP JetSend-enabled printers rather than manually
entering an IP address or DNS name.
To add a HP JetSend-enabled printer to the list:
1 At the control panel, press P RINT ( F3 ).
2 Type the IP address or DNS name for the HP JetSend-enabled
printer you want to add, and then press
. The printer is added
to the list.
Note In order to use DNS names instead of IP addresses, first configure the
DNS Server Address and DNS Domain settings in the Network
configuration menu.
3 If you want to add another HP JetSend-enabled printer, press
N EW ( F1 )and repeat step 2. The list can contain up to 64 devices.