HP 3100C - Manual (Page 61)

60
Search error. An unexpected problem
occurred in the LDAP search
(for example, memory
shortage, or problem with the
network link or LDAP server). ● Try the search again.
● Turn the digital sender off and then back
on.
● If the problem persists, contact
HP customer support.
Sorry, you have typed an
incorrect password. Please
retype your password. The digital sender did not
recognize the password you
typed. ● Press any key to clear the message, and
then retype the password. Passwords are
case-sensitive, so make sure you enter
the correct combination of lowercase and
uppercase letters.
● Check the user profile for the password.
This operation can require
several minutes. Do you
really want to proceed? You are being asked to
confirm that you want to
check the address book
database. ● Press O K to continue with the database
check or press C ANCEL to cancel. If you
continue, the digital sender shuts down
and restarts.
This user is not registered.
Please add them. The user needs a user
profile. ● See “Creating and maintaining user
profiles” on page 41.
This will clear the
configuration and all the
destinations. Do you really
want to proceed? You are being asked to
confirm that you want to reset
the digital sender to the
factory defaults. ● Press O K to continue with the reset or
press C ANCEL to cancel.
This will clear your changes.
Do you really want to
proceed? You are being asked to
confirm that you want to
discard all changes that you
have made in the
configuration menu. ● Press O K to discard your changes; this
takes you out of the configuration menu.
Press
C ANCEL to return to the
configuration menu, where you can use
S AVE to save the changes before exiting.
The user name you typed
was not found. Contact the
administrator. The digital sender did not
recognize the user name you
entered. ● Make sure the name is correct and try
again.
The WINS configuration is
inconsistent. Please check. There is a problem with the
WINS (Windows Internet
Naming Service)
configuration. ● Try reentering the information in the
Network configuration menu.
● If the problem persists, contact
HP customer support.
You do not have sufficient
access rights. The account name used to
authenticate searches with
LDAP server has insufficient
rights to access the
information. ● Use the E-mail configuration menu at the
control panel to change the account name
and password.
You need to become a
registered user to use this
digital sender. Please contact
your admin. Allow user self-registration in the
General configuration menu is
disabled.
● The administrator must add the user. See
“Creating and maintaining user profiles”
on page 41
.
● Enable Allow user self-registration.
Control panel messages (continued)
Message Description Actions