Harman-Kardon WMS 470 User Manual

Page 30

Advertising
background image

Thank you...

Symbols Used

Firmware

Transmitter Battery

24

WMS 470

...for purchasing an AKG product. This manual contains important instructions for setting up
and operating your equipment. Please take a few minutes to read the instructions below
carefully before operating the equipment. Please keep the manual for future reference.
We hope you enjoy using your system!

The lightning flash with arrowpoint in an equilateral triangle means that there are
dangerous voltages present within the unit.

The exclamation point in an equilateral triangle on the equipment indicates that it
is necessary for the user to refer to the User Manual. In the User Manual, this
symbol marks instructions that the user must follow to ensure safe operation of
the equipment.

AKG continually improves the internal firmware of this wireless system in order
to meet changing customer needs in the best possible way. Should your sys-
tem use a different firmware version than the one described in this user man-
ual, some functions may differ from the related instructions.

To find out the actual firmware version implemented in your system, please
check the menu. The firmware version described in this user manual is stated
on the cover page.

Before you read on, we recommend comparing the receiver firmware version
against the version described in the manual. If the two versions are not iden-
tical, please visit www.akg.com to find out about the latest changes.

The display on your handheld transmitter or bodypack transmitter indicates the mini-
mum remaining battery capacity in transmitter operating hours.

To ensure an accurate readout, do not use any batteries other than

-

new, high quality AA size (LR6) alkaline dry batteries from Duracell or Energizer,

-

AA size (FR6) lithium batteries,
or

-

high quality AA size NiMH rechargeable batteries with a capacity of 2100 mAh or
higher.

-

In the "BAT.TYP" menu, select the battery type you inserted ("LR6", "FR6", "HR6
(NiMH)) or automatic battery detection mode ("AUTO").

-

In "AUTO" mode, using weak or very old batteries may cause incorrect capacity indi-
cations. In this case, select the battery type manually.

Since the chemical parameters of batteries take some time to stabilize, the system may
correct the battery indication (type and remaining capacity) about 10 to 30 minutes
after switching power to the transmitter on.

Lithium batteries have a life of up to 14 hours. The display, however, will only indicate
a maximum of 10 hours. With new lithium batteries, the display will constantly indicate
"10h" during the first four operating hours.

Important Note

Important Note

WMS470_F031016_Hex_final 22.12.2010 14:19 Uhr Seite 24 (Schwarz/Black Auszug)

Advertising