Harman-Kardon WMS 470 - Manual (Page 47)

6 Advanced Functions (EXTRA Menu)
As long as this function is active, the received signal contains a continuous signal at a pre-
defined frequency (a pilot tone). If the receiver detects no pilot tone, the receiver's audio
output will be muted.
• The HT 400, HT 450, PT 400, and PT 450 transmit no pilot tone. If you use the receiver
together with these transmitters, we recommend deactivating the pilot tone.
• To reset all parameters to their factory default settings, use the "FACTORY RESET"
screen.
The INFO screen lets you call up information about your receiver:
-
j"V1.1": firmware version
- "B 4--.50": frequency band
- "PV 1.0": Preset version
- "INTRO": This screen allows you to edit the name displayed upon switching power to the
receiver ON. (The default setting is "AKG PROFESSIONAL".)
The "INTRO" submenu lets you enter and save a new name at any time.
You can select any combination of up to 16 letters and numerals.
1. Select the "INTRO" screen.
The first character starts flashing.
2. Use the arrow keys to select the desired characters.
Pilot Tone
FACTORY RESET
INFO
INTRO
41 WMS 470
Note
WMS470_F031016_Hex_final 22.12.2010 14:19 Uhr Seite 41 (Schwarz/Black Auszug)