HP 16V - Manual (Page 53)

Control Panel Functions
Clearing the Buffer and Reinitializing the Printer
Pressing and holding down for five or more seconds clears the
print buffer and tells the printer to initialize itself. You might use
this function if you cancel a print job in the middle and want to clear
the printer and start over. In this case, permanently downloaded
fonts are removed by the initialization process. You must download
the fonts again.
Selecting the Self Test Menu
Pressing puts the printer into the self test menu which
allows you to print a status report which lists printer operation
options currently selected in the selected emulation.
To select the self test menu and print a status report, follow these
steps:
1.
2.
3.
4.
Make sure that the message display indicates
READY
with the
ONLINE and DATA indicators off.
Press the button for five or more seconds.
The message changes to
PCL PAGE CONFIG START.
Select a desired emulation.
(PrintPartner l6ADVonly)
Press the + or - buttons until the desired emulation appears.
Start printing.
Press the button. The message display indicates
SELF
TEST
and the
DATA
indicator flashes, then a status report page is
printed.
2-6
User’s Manual