HP 16V - Manual (Page 65)

Menu Items
FPS menu
Jam recovery
Print FPS errors
Job timeout
Wait timeout
Manual timeout
Banding mode
Auto
Off
On
Whether the jammed page is reprinted
Whether an error report is printed out
Time interval to be allotted between jobs
Time interval to be allotted for waiting a job
end
Time interval to be allotted for manual
insertion
Switching printing control (band/full page)
Auto mode (standard setting). Automatically
switches the following two models depending
on the total RAM capacity.
l
11MB or less (standard 4MB + optional
7MB or less): virtual memory model
(equivalent to banding mode on)
l
12MB or more (standard 4MB + optional
8MB or more): speed model (equivalent to
banding mode off)
Speed model. Attaches importance to speedup
of printing control, thus processing all pages
per job. Print density depends on the RAM
capacuy.
l
300 dpi when total RAM capacity is 4M to
11M bytes (standard 4MB + optional 7MB or
less)
l
600 dpi when total RAM capacity is 12M
bytes or more (standard 4MB + optional 8MB
or more).
Note:
l
To print at 600 dpi when total RAM
capacity is 4M to 11M bytes (standard 4MB +
optional 7MB or less), set banding mode on.
l
To print on legal-size paper, expand the total
RAM capacity to 12M bytes or more (optional
8MB or more) even in printing at 300 dpi or
set banding mode on.
(Virtual) memory model. Attaches importance
to reliable printing rather than speedup, thus
processing data per page.
2-18 User’s Manual