HP 16V - Manual (Page 57)

Control Panel Functions
Selecting Paper Tray, MFF, or Manual Paper Feed
Pressing puts the printer in tray select mode which allows
you to select paper sources to be used. The paper sources are tray
1, tray
2 (if installed), MFF (if installed), and manual feed slot. When a paper
source runs out of paper, the printer switches it for another one. When
the manual feed slot is selected, other paper sources are made invalid.
To select a paper source, follow these steps:
1. Make sure that the message display indicates
READY
with the
ONLINE and DATA indicators off.
2.
Press the button briefly.
The message changes to
TRAY
that tray 1 is selected.
TRAYl*.
The asterisk means
3. Select or deselect a paper source.
This step is valid when tray 2 (option) or MFF (standard) is
installed. Pressing the button in this condition makes the
asterisk disappear. Tray 1 is deselected. Pressing the
button again makes the asterisk reappear. Tray 1 is selected.
4. Select or deselect other paper sources.
Press the + or - buttons briefly to display another paper source.
Use the button in the same way as described above.
5.
Save the selections.
Press button to save the new settings and return to the
ready state.
2-10 User’s Manual