Hubbell EDTV CLT2054 - Manual (Page 8)

8
6' 10"
10' 10"
Lighting When You Need It
Vending areas typically have an ice
machine and soft drink dispenser that
do not require lights on 24 hours per day.
The lights will need to be on when a guest
steps into the vending area and shut down
when the guest leaves. Key is to set the occupancy
sensor to a minimum setting to prevent false-ons
from the hallway traffic not entering the vending area.
Technology: Passive Infrared
Feature: Passive infrared will detect body heat, adaptive technology
programs the switch to the daily movements in those spaces. AP units
feature hard lens, prevents tampering.
Ice Machine/Vending Machine Areas Design Guide
Typical Layouts and Coverage Patterns
Recommended Products
Passive Infrared
Line Voltage Ceiling Sensor:
LVPR1500R
Wall Switch:
AP1277I1N No Button