HP 2420 - Manual (Page 206)

The following Back Cover options are available:
■ Size is: drop-down menu
■ Add a Blank or Preprinted Cover check box
■ Source is: drop-down menu
■ Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes that you make to
the Size is: setting here override any previous Size is: settings that you made in other Use Different
Paper/Covers options.
When you select Back Cover, you must also select the Add a Blank or Preprinted Cover check
box to enable the setting. When you select this check box, the Source is: and Type is: drop-down
menus become available and a check mark appears next to the Back Cover option.
NOTE The Back Cover options are not available when the Booklet Printing Layout setting
is enabled on the Finishing tab. The back cover setting is unavailable, because this page
would otherwise be printed in the middle of a booklet.
The Source is: setting specifies the source tray to use for adding a back cover to the document. The
list of source trays depends on the product accessories. Any optional media trays that are installed
through the Device Settings tab also appear here. For more information about the Source is:
setting, see the
Source Is section of this chapter.
The Type is: drop-down menu shows all of the media types that the product supports. For more
information about the Type is: drop-down menu settings, see the Type is: in the
Type is section of
this chapter.
NOTE You must use the same size of media for the entire print job. All Use Different Paper/
Covers options use the last Size is: setting that you select in any one of the Use Different
Paper/Covers options.
When you change the type and source of the media and covers, the settings you select
remain configured until you close the software program.
Document preview image
The document preview image is a line-drawn image of a page that represents graphics and text. The
document preview image is always oriented so that the contents of the page are right-side-up. The
document preview image appears in the upper-right corner of the Paper/Quality, Effects, and
Finishing tabs.
Switching between tabs does not change the location or appearance of the document preview
image. When you move the mouse over the document preview image, the mouse cursor changes
from an arrow to a gloved hand. You can toggle between portrait and landscape page orientation by
clicking on the image.
Print Quality
The Print Quality group box contains the Print Quality drop-down box and the EconoMode check
box.
190 4 HP PCL 6, HP PCL 5e, and HP PS 3 emulation unidrivers for Windows
HP unidrivers