The HP LaserJet PCL 6 and PCL 5e drivers for Windows features automatic discovery and driver
configuration for product accessories at the time of installation. Accessories that can be detected
include the duplexing unit, optional paper tray, and dual inline memory modules (DIMMs).

Update Now

If you have modified the configuration of the product since installation, the driver can be
automatically updated with the new configuration in environments that support bidirectional
communication. Use the Update Now feature to automatically reflect the new configuration in the
driver.

NOTE

The Update Now feature is not supported in environments where shared Windows NT

4.0, Windows 2000, or Windows XP clients are connected to Windows NT 4.0, Windows
2000, or Windows XP hosts.

HP Driver Preconfiguration

HP Driver Preconfiguration is a software architecture and set of tools that permits HP software to be
customized and distributed in managed corporate printing environments. Using HP Driver
Preconfiguration, information technology (IT) administrators in corporate and enterprise
environments can preconfigure the printing and device defaults for HP print drivers before installing
the drivers in the network environment. For more information, see the HP Driver Preconfiguration
Support Guide, which is available on the software CD or from

www.hp.com/support/lj2410

for the HP

LaserJet 2410 printer,

www.hp.com/support/lj2420

for the HP LaserJet 2420 printer, or

www.hp.com/

support/lj2430

for the HP LaserJet 2430 printer.

Information about HP Driver Preconfiguration is also available by going to

www.hp.com/go/hpdpc_sw

and then selecting Cross operating system (BIOS, Firmware, Diagnostics, etc.).

HP LaserJet documentation