Finalising dvd-rw/dvd-r/+rw disc (finalize disc), Using finalize button to finalise a disc, Before you begin – Hitachi DZ-GX5040E User Manual

Page 103: English, Press the disc navigation button, Press the menu button

Advertising
background image

English

103

 

FINALISING DVD-RW/DVD-R/+RW DISC (FINALIZE DISC)

If you want to play back a DVD-RW/DVD-R/+RW disc recorded on this DVD video camera/
recorder, using a device conforming to 8 cm DVD disc – such as a DVD recorder/player, etc. – you
must finalise the disc on this DVD video camera/recorder.
If you wish to display the DVD video menu when playing back a +RW on a DVD player or DVD
recorder, finalise it using the Disc Navigation menu.
No further recording can be done on a finalised DVD-RW (VF-mode)/DVD-R/+RW. You can,
however, unfinalise the DVD-RW (VF-mode)/+RW so that other scenes can be recorded on it.
Additional recording is possible on a finalised DVD-RW (VR-mode): unfinalising is not necessary.

1

Press the DISC NAVIGATION button.

2

Press the MENU button.

3

Use the 2/1/0/// buttons to
choose “Finalize Disc” on the “Disc” menu
screen, and then press the  button.

The disc will be finalised.

4

Choose “YES”, and then
press the  button.
The message showing
that the disc is being
finalised will appear,
and the disc will then be
finalised.

5

When finalisation is complete, the Disc
Navigation screen of all programmes will
appear.
' will appear on the Disc Navigation screen
for a finalised disc.

Note

:

Do not finalise a disc recorded on this DVD video

camera/recorder using any other device.

If the disc in the DVD video camera/recorder has

already been finalised, you cannot choose “Finalize
Disc”.

The time required to finalise disc that appears on the

“Finalize Disc” screen is only for reference.

The shorter the recording time on disc, the longer it

will take to finalise it.

The second and later finalisation will be faster with a

disc which has previously been finalised.

Using FINALIZE button to finalise

a disc

Press the FINALIZE button during recording
pause: The screen shown in step 4 above will
appear. Choose “YES”, and then press the 
button: Finalising will start.

Before You Begin

Be sure to use the AC adapter/charger to power the DVD video camera/

recorder when finalising a DVD-RW/DVD-R/+RW disc. Finalisation
cannot be executed using a battery. If the DVD video camera/recorder is
turned off during finalisation and the finalisation is interrupted, incorrect
finalisation will result, and at worst, the disc may be damaged.

ENTER

F i n a l i z e ? ( A p p r o x . 3 m i n . )

F u r t h e r r e c o r d i n g o n t h i s
d i s c w i l l b e i m p o s s i b l e .

F i n a l i z e D i s c

YES

NO

*

*

2

1

*1 Displayed only when

a DVD-R is used.

*2 Will vary depending

on the recording
time.

0 01/ 01 5

A l l P r o g r a ms

PLAY

TOP

PREV

NEXT

END

001 / 010

5 / 1 / 2 0 0 7

8 : 0 0 : 0 0

1 0 / 1 / 2 0 0 7
8 : 0 0 : 0 0

1 2 / 1 / 2 0 0 7
8 : 0 0 : 0 0

1 6 / 1 / 2 0 0 7

8 : 0 0 : 0 0

2 0 / 1 / 2 0 0 7
8 : 0 0 : 0 0

2 5 / 1 / 2 0 0 7

8 : 0 0 : 0 0

3 1 / 1 / 2 0 0 7
8 : 0 0 : 0 0

2 / 2 / 2 0 0 7
8 : 0 0 : 0 0

Screen when viewed on DVD recorder/player
(DVD-RW (VF-mode)/DVD-R/+RW)

Finalised disc

Advertising
This manual is related to the following products: