Hitachi DZ-GX5040E - Manual (Page 119)

English
119
Note
:
• When writing images edited on PC to a brand-new DVD-RW, do not format the disc on DVD video camera/
recorder.
• Some vertically installed and slot-in type drives on PC cannot accept an 8 cm disc.
• An adapter that converts 8 cm CD to 12 cm diameter (for 8 cm CD) cannot be used for any 8 cm DVD-RAM/8 cm
DVD-RW/8 cm DVD-R/8 cm +RW.
• If you use, on PC, a DVD-RW/DVD-R/+RW recorded on the DVD video camera/recorder, finalise it on the DVD
video camera/recorder (see page 103).
• Some DVD-ROM drives cannot read a DVD-RW/DVD-R/+RW recorded on the DVD video camera/recorder.
BEFORE TERMINATING PC CONNECTION (UNPLUGGING PC
CONNECTION CABLE)/CHANGING OVER POWER SWITCH
[When using Windows]
1
Before unplugging the PC connection cable
from PC, terminate the application and then
click the “Hardware Removal” icon on task
tray at the bottom right of Windows screen.
2
Choose “USB mass storage device”. The drive
name (E:, etc.) will depend on the PC used.
3
A message showing that “hardware removal”
is possible will appear.
Unplug the PC connection cable.
[When using Macintosh]
When removing the DVD video camera/recorder from PC, choose the drive icon of DVD video
camera/recorder (disc or card), and choose “Eject” in the “File” menu.
Click
* If “hardware removal” results in error, terminate
Windows ® once, and then unplug the PC
connection cable. When using Windows ® 2000
Professional, installing Windows ® 2000 SP3 or
later may resolve the problem. Ask your PC
manufacturer or Microsoft Corporation how to
get Windows
® 2000 SP3.