Hitachi DZ-GX5040E - Manual (Page 135)

English
135
Error occurred. Please
replace disc or format
disc. • Abnormality has occurred with the DVD-RAM/DVD-RW/+RW
disc to be repaired. Initialise the disc before using it, or use the
another disc. Initialising the disc will erase all data on it.
• See *2 on page 136.
100
Error occurred. Please
replace disc. An abnormality occurred with a DVD-R disc to be repaired.
Replace the disc.
—
Finalize may not be
complete. Finalize again
now? This message will appear when power is supplied again and the
disc is reinserted after power was shut off during finalisation due
to a power failure, etc. Choose “YES” if you wish to be sure
finalising is performed.
103
JPEG files related to
scenes are not found. This message will appear when stills recorded on DVD-RAM disc
using a device other than this DVD video camera/recorder are to
be copied to card.
—
NO DISC This message may appear when the DVD video camera/recorder
or disc is moved from a cold place to a warm place.
Condensation has occurred on the camera/recorder lens or DVD
drive. Do not remove the disc; leave the DVD video camera/
recorder turned off in a place as dry as possible for 1 – 2 hours.
7
The disc has not been inserted.
Insert it.
39
The disc is not inserted correctly.
Push the disc against the turntable at the centre until a click is
heard.
See *3 and *4 on page 137.
39
Is the disc surface/bottom reversed?
Check the surface/bottom of disc, and reinsert it correctly.
39, 40
No more scenes.
PlayList was deleted. • All scenes are deleted from the play list.
• Since a play list with no scenes cannot be supported by
specifications, a play list from which all registered scenes have
been deselected will be deleted.
96, 97
PlayLists over limit. An attempt was made to create new play list or copy play list,
even though limit specified for play lists in the video recording
standard had already been stored.
93
Same scenes on Play
List will be deleted.
Delete scenes? • This will appear when scenes are to be deleted.
• When a play list exists on disc, an attempt to delete scenes in
programme will display this message. (This message will not
appear if you deselect scenes from play list.)
80
Scenes over limit.
Cannot add scenes. The number of scenes entered in play list has reached the limit
that can be entered.
Delete several scenes.
93, 97
Scenes over limit.
Cannot divide scene. The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.
93, 97
Stop processing. The  button was pressed to stop processing of multiple scenes. —
There was no scene
which can be deleted. This message will appear if you try to delete multiple scenes on
Disc Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
80, 87
Message Cause & Troubleshooting
Reference
page