Hitachi DZ-GX5040E - Manual (Page 69)

English
69
Disc Navigation screen
Note
:
• Pressing the DISPLAY button will display the
recording date/time of the scene on which the cursor
is placed in the space for operating guide. Pressing
DISPLAY again will display the operating guide.
• If no disc or card is inserted, the Disc navigation
screen cannot be displayed even by pressing the
DISC NAVIGATION button.
• Each time Disc Navigation is started with a DVD-RW
(VF-mode)/DVD-R disc inserted, message “Creating
Thumbnail ...” will appear. After the message appears,
the Disc Navigation screen will appear.
• If the following disc or card is inserted, the Disc
Navigation screen will appear or some message will
be displayed:
- Write-protected disc
- Finalised DVD-RW (VF-mode)/DVD-R/+RW disc
- DVD-RW (VF-mode)/DVD-R recorded on a Hitachi
DVD video camera/recorder model other than DZ-
GX5100E/GX5060E/GX5040E/GX5020E
- Locked card
• Do not leave the disc navigation screen displayed on
TV to which the DVD video camera/recorder is
connected: Doing so could damage the TV screen,
possibly by burning.
*1 Scene:
Video (movie) .......... “One scene” refers to images recorded from one press of REC button until recording is
stopped by pressing the REC button again.
Photo (still) .............. “One scene” refers to a single photo recording by pressing the PHOTO button.
*2 No still icon will appear for card.
*3 The operation guide will vary depending on the operation status of DVD video camera/recorder.
*4 Appears when 13 scenes or more have been recorded.
*5 “
” will appear for card.
0 01 / 01 4 A l l P r o g r a ms
PLAY
Cursor
Still image icon *2
Operation guide *3
Thumbnail
Selected scene *1 number/
Number of all scenes
Current page position *4
Bar graph
Disc type icon *5
Icons to be displayed on thumbnail:
................. Skip (p. 84)
2 ...................... Fade-in (p. 83)
3 ...................... Fade-out (p. 83)
& ..................... Lock (p. 87)