Hitachi DZ-GX5040E - Manual (Page 36)

English
36
RESETTING MENU SETTINGS TO DEFAULTS (RESET)
You can restore menu settings to defaults (initial settings at the factory (p. 145)). (Note, however, that
the date/time will not be reset.)
1
Choose “Reset” on the
“Initial Setup” menu
screen, and then press
the  button.
The screen for verifying reset will appear.
2
If you are sure that you
wish to reset, use the
0 button to choose
“YES”, and then press
the  button.
The setting items have now been reset to
defaults.
Note :
To cancel resetting midway, choose “NO” on the screen
for verification in step 2 or press the
 button.
TURNING RECORD LED ON OR OFF (RECORD LED)
You can switch off the recording indicator on the front of DVD video camera/recorder even during
recording.
Select “On” or “Off”, and
then press the  button.
On: The recording
indicator will light
red to show that the
DVD video camera/recorder is recording.
Off: The recording indicator will not light even
during recording.
Note :
• The Record LED setting will not appear in the on-
screen information display.
• The Record LED setting will be stored in memory
even when the DVD video camera/recorder is turned
off.
• Specify “Record LED: Off” when recording a subject
behind a glass or water tank that reflects light: The
reflected light of the recording indicator will not be
recorded.
• Even if “Record LED: Off” is specified, the recording
indicator will light while the self-timer is counting
down.
CHANGING SETTING OF DEMONSTRATION
1
Press the MENU
button, choose “Initial
Setup”, “Demo Mode”,
and then press the 
button.
2
Press the 2 or 1 button to choose the
desired option, and then press the 
button.
3
Press the MENU button again to exit setting.
Note :
• Pressing the  (STOP/EXIT) or DISC NAVIGATION
button will exit demonstration.
• If you choose “Auto”, the demonstration will not start if
a disc is loaded with the power switch set to “ !” or
“ ”, or a card is loaded with the power switch set to
“ "”.
• The demonstration function will not work when the
DVD video camera/recorder is connected to PC (DZ-
GX5100E/GX5060E only).
• While the demonstration is being given, the recording
indicator will blink.
R e c o r d L E D
P o w e r S a v e
Be e p
ENTER RETURN
Demo Mode
Re s e t
L a n g u a g e
I n i t i a l S e t u p
On
Off
On
English
Auto
ENTER
Re s e t ?
YES NO
Re s e t
R e c o r d L E D
On
P o w e r S a v e
Be e p
ENTER RETURN
Demo Mode
Re s e t
L a n g u a g e
I n i t i a l S e t u p
On
O f f
Auto: To start demonstration if the DVD
video camera/recorder is inactive for
approx. 3 minutes after it is turned on.
Off: To set demonstration to off.
Start: To start demonstration immediately.
ENTER RETURN
Demo Mode
R e s e t
Re c o r d LED
Po w e r S a v e
B e e p
L a n g u a g e
I n i t i a l S e t u p
A u t o
O f f
S t a r t