Battery charged status, Attaching battery to dvd video camera/recorder, Removing battery – Hitachi DZ-GX5040E User Manual

Page 29

Advertising
background image

English

29

Battery charged status

You can find out the charged status of battery by checking the CHARGE indicator on AC adapter/
charger:

Note

:

See “Troubleshooting” on page 137 when the CHARGE indicator blinks.

Reference for time required to charge battery (at approx. 25ºC):

DZ-BP07PW (provided)/DZ-BP7SW (optional): Approx. 90 minutes
DZ-BP14SW (optional): Approx. 165 minutes
The charge time will vary depending on the remaining power level of battery.

ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER

1

Fit the battery to the battery attachment
platform on this DVD video camera/recorder
and slide it downward until a click is heard.

Note

:

Make sure that the battery is in the correct orientation.
Make sure that the battery is securely attached:

Incomplete attachment could cause the battery to fall,
resulting in damage.

REMOVING BATTERY

After using the DVD video camera/recorder, remove the battery from it.

1

While holding down the BATTERY EJECT
button, slide the battery upward to remove it.

Note

:

For safety, be sure to turn the DVD video camera/

recorder off before attaching or removing the battery.

Be careful not to drop the removed battery.
If the battery remains attached, minute level current

will flow even if the DVD video camera/recorder is off,
and the battery will discharge.

Set the power switch to OFF before removing the

battery.

Charge status

CHARGE indicator

During charge

Lit

Charge complete

Goes out

Terminal
side must be
down.

Advertising
This manual is related to the following products: