Attaching the pedestal – HP PL5000N User Manual

Page 14

Advertising
background image

6

HP Pavilion Plasma HDTV User’s Guide

Attaching the pedestal

These steps attach the pedestal to the TV. To remove the
pedestal, perform these steps in reverse order.

1

Position the TV display unit and the pedestal:

Put a pad or clean cloth on a smooth, stable
table. Put the display unit with the glass screen
facing downward on the pad.

Position the pedestal with the back (thick part
of stand base) toward you on a stable table or
on the floor.

2

Lower the TV display unit onto the pedestal poles,
matching the marks:

Hold the display with the back toward you. Align
the holes in the display bottom with the poles of
the pedestal, matching the stamped marks on the
back of the display with the pedestal marks.
Gently lower the display onto the pedestal,
inserting the poles into the display.

3

Insert two long screws (C, see figure under
“Assembling the Pedestal”) for each pole into the
back of the display.

c

CAUTION: Never place the television or
the display unit with the glass screen
facing downward, unless it is protected
with pads.

mb5pohtv.book Page 6 Wednesday, July 6, 2005 9:52 AM

Advertising
This manual is related to the following products: