HP PL5000N - Manual (Page 6)

vi HP Pavilion Plasma HDTV User’s Guide
WARNING: Do not operate the TV with the cover
removed.
WARNING: The TV is not user serviceable. To prevent
damage to the TV, have a qualified person repair or
replace it.
WARNING: For your safety, always unplug the TV from
its power source and from any telecommunications
systems (such as CATV, SAT, or any other peripheral)
before performing any service procedures. Failure to do
so may result in personal injury or equipment damage.
Hazardous voltage levels are inside the TV.
TV Antenna Connectors Protection
External television antenna grounding
If an outside antenna or cable system is connected to
the product, be sure the antenna or cable system is
electrically grounded so as to provide some protection
against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/
NFPA 70, provides information with regard to proper electrical grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna-
discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.
Lightning Protection
For added protection of any product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug the product from the wall outlet
and disconnect the antenna or cable system. This will
prevent damage to the product from lightning and
power line surges. Power lines
An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light
or power circuits, or where it can fall into such power
lines or circuits.
WARNING: When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with
them could be fatal.
Dear HP Customer
Welcome to the HP family of customers. We hope that
you will have many years of enjoyment from your new
Plasma TV.
To obtain maximum benefit from your set, read these
instructions before making any adjustments, and retain
them for future reference.
Retain your purchase receipt, and record the product
number and serial number of your set in the space
provided on the last page of these instructions.
2
1
1
2
3
4
5
6
7
3
4
5
6
7
Antenna Grounding
Antenna Grounding
Grounding Component
Electric Service Equipment
Ground Clamps
Ground Clamp
Grounding Conductors (NEC Section 810-21)
Antenna Discharge Unit (NEC Section 810-20)
Antenna Lead in Wire
Power Service Grounding Electrode System
(NEC Art 250, Part H)
Reference
mb5pohtv.book Page vi Wednesday, July 6, 2005 9:52 AM