HP PL5000N - Manual (Page 53)

Using the Menus
Using the Menus 45
2
Auto and Signal meter cannot be selected while the
CableCard is inserted.
Auto program
Automatically scans all available channels.
Auto program is not available while the CableCard is
inserted.
1
2
3
To make a channel available that has been located by
auto scan, in the Manual program mode, move the
cursor to Apply, and press Select.
Press to select submenus.
Press to set enter submenu.
SELECT
Program channel
Auto
Manual
Signal meter
Press to select ANT In.
Press to select Cable or Antenna.
SELECT
Auto program
ANT In
Mode
Start scan
Cable
All
Press to select Mode.
Press to select All or Analog.
All: Analog and digital
Analog: Analog only
SELECT
Auto program
ANT In
Mode
Start scan
Cable
All
Press to select Start scan.
Press to start.
After Auto program is complete, the unit returns to
Manual program mode.
SELECT
Auto program
ANT In
Mode
Start scan
Cable
All
Now scanning analog channel ...
Progress
mb5pohtv.book Page 45 Wednesday, July 6, 2005 9:52 AM