High End Systems Technobeam - Manual (Page 35)

1-8 Installing the Yoke Technobeam
®
User Manual
• The core which is colored brown must be connected to the terminal
which is marked with the letter “L” or colored red.
Class 1 equipment: This equipment must be earthed.
VIGTIG FIKKER HEDS INFORMATION -
DANMARK
Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket
Installing the Yoke
You will need: one 1/4” allen wrench
This section explains how to install the moving-track yoke. You can
adjust the yoke however you want to distribute the weight of the
fixture. You can even slide the yoke all the way to the end of the
fixture to hang it straight down.
1. Identify the components shown in Figure 1-1:
Figure 1-1. Identifying yoke components.
eller
Yoke
T-handle
(1 on each side)
Allen screw
(1 on each side)
Yoke slide bezel
(1 on each side)
Mounting holes
(2 on each side)
Side handle
(loosen 2 allen
screws to move yoke)