Humax HDCI-2000T - Manual (Page 20)

3.3 Antenna Setting
You can select to turn the antenna power on or off.
• Power on the antenna only in the following case:
-
If you are using an active antenna that has its power supplied
by the aerial.
• Power off the antenna in the following cases and in all other
cases:
-
If you are using an active antenna with its own power source.
- If you are using a passive antenna.
Caution: Be sure to turn off the antenna power when using an active
antenna with its own power source. Damage may occur to
the antenna if left on.
**
Select On/Off using the OK or button. You will be prompted to enter your password when selecting On.
**
Note: The default password is 0000.
3.4 Channel Search
Channel search will activate automatically after the antenna setting
option has been selected. Wait until the search is completed. If you
want to stop the search, press the OK
button.
**
When channel search is complete, the results will appear. Press the OK
button to proceed to the next step.
GB 19