Humax HDCI-2000T - Manual (Page 38)

7. System
In this chapter you can easily access the service features of the
product. Options such as CI-Module, system status, Dolby Digital and
startup channel are included in System.
**
Note: Press the BACK button to save the changes and return to
the previous menu. Press the MENU button to exit the
menu screen.
7.1 CI-Module
CI-Module shows you the current status of the Common Interface module.
1. Press the MENU button.
2. Select System using the button and press the OK
button.
3. Select CI-Module using the button and press the OK
button.
4. The CI-Module information will be displayed.
**
Note: The displayed information about each Common Interface may
differ depending on the type of Common Interface.
7.2 System Status
System Status allows you to view the system information of the product.
1. Press the MENU button.
2. Select System using the button and press the OK
button.
3. Select System Status using the button and press the OK
button.
4. The system information of the product will be displayed.
**
Note: The information displayed may differ.
7. System
GB 37