Humax HDCI-2000T - Manual (Page 53)

10.2 Manual Search
You can search channels manually using the search parameters.
1. Press the MENU button.
2. Select Installation using the button and press the OK
button.
3. Select Manual Search using the button and press the OK
button.
4. Select Channel, Frequency or Network Search using the
button, and press the OK or button.
1. Channel
Enter the channel to search. When entering the channel number, the appropriate frequency value is displayed.
1. Select Channel using the button.
2. Select a channel using the OK or button. You can enter the value directly using the NUMERIC(0-9)
buttons.
2. Frequency
Enter the frequency to search directly. When entering the frequency, the appropriate channel for the entered frequency
is automatically displayed.
1. Select Frequency using the button and press the OK button.
2. Enter the frequency using the NUMERIC(0-9) buttons and press the OK button.
3. Network Search
When the information of a different frequency is provided, you can also search the channels that belong to that
frequency.
1. Select Network Search using the button and press the OK button.
2. Select Disable or Enable using the OK or button.
**
Note: You can search channels after setting manual search. Refer to 10.1 Automatic Search.
10. Installation
GB 52