Humax HDCI-2000T - Manual (Page 45)

2. Power On
You can set the time you want the product to be automatically turned on.
1. Select Power On using the button.
2. Select Enable/Disable using the OK or button.
Enable Uses Power On and sets the time the product should
be turned on.
Disable Does not use Power On.
**
3. When you select Enable, enter the Channel No. and Time using
the OK , or NUMERIC(0-9) buttons. Then, select OK
and press the OK button.
**
Note: To enter a radio channel in Channel No., press the TV/RADIO button to switch to radio.
3. Power Off
You can set the time you want the product to be automatically turned off.
1. Select Power Off using the button.
2. Select Enable/Disable using the OK or button.
Enable Uses Power Off and sets the time the product should
be turned off.
Disable Does not use Power Off.
**
3. When you select Enable, enter the Time using the or
NUMERIC(0-9) buttons. Then, select OK and press the OK
button.
**
Note: Once Power On/Off has been set, it is repeated everyday.
8. Setting
GB 44