Humax HDCI-2000T - Manual (Page 42)

2. Change Password
Change Password allows you to change the current password.
1. Select the Change Password using the button and press
the OK button.
2. Enter New Password using the NUMERIC(0-9) buttons.
3. Enter New Password again to confirm Verify Password.
**
Note: The default password is 0000.
3. Installation Lock
Installation Lock allows you to block access to the installation menu settings you have previously made.
1. Select Installation Lock using the button.
2. Select Enable/Disable using the OK or button.
Enable Password is necessary when accessing installation
menu.
Disable Access to installation menu is permitted without
password.
GB 41