Hand Held Products HANDHELD 3800G - Manual (Page 28)

2 - 6 3800g User’s Guide
Emulate External Keyboard should be scanned if you do not have an external
keyboard (IBM AT or equivalent).
Note: After scanning the Emulate External Keyboard bar code, you must power
cycle your computer.
Keyboard Modifiers
This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo
Mode.
Control + ASCII Mode On: The imager sends key combinations for ASCII
control characters for values 00-1F. Refer to Keyboard Function
Relationships , page 8-1 for CTRL+ ASCII Values. Default = Off
Turbo Mode: The imager sends characters to a terminal faster. If the terminal
drops characters, do not use Turbo Mode. Default = Off
Numeric Keypad Mode: Sends numeric characters as if entered from a
numeric keypad. Default = Off
Emulate External Keyboard
Control + ASCII Mode On
* Control + ASCII Mode Off
Turbo Mode On
* Turbo Mode Off
Numeric Keypad Mode On
* Numeric Keypad Mode Off