Rs-232 baud rate, Rs-232 baud rate -7 – Hand Held Products HANDHELD 3800G User Manual
Page 29
Advertising
2 - 7
Automatic Direct Connect Mode:
This selection can be used if you have an
IBM AT style terminal and the system is dropping characters.
Default = Off
RS-232 Baud Rate
Baud Rate sends the data from the imager to the terminal at the specified rate.
The host terminal must be set for the same baud rate as the imager.
Default = 115,200
.
Automatic Direct
Connect Mode On
* Automatic Direct Connect
Mode Off
300
2400
600
1200
4800
38400
9600
19200
* 115,200
57,600
Advertising