Hand Held Products HANDHELD 3800G - Manual (Page 81)

3800g User’s Guide 7 - 21
UPC E0 and UPC E1 Expand
UPC E Expand expands the UPC E code to the 12 digit, UPC A format.
Default = Off.
UPC E0 and UPC E1 Addenda Required
When Addenda Required is set to on, the imager will only read UPC E bar codes
that have addenda.
Default = Not Required.
UPC E0 and UPC E1 Addenda Separator
When this feature is on, there is a space between the data from the bar code and
the data from the addenda. When turned off, there is no space.
Default = On.
UPC E0 Check Digit
Check Digit specifies whether the check digit should be transmitted at the end of
the scanned data or not.
Default = On.
* Off
On
* Not Required
Required
Off
* On
Off
* On