Hand Held Products HANDHELD 3800G - Manual (Page 64)

7 - 4 3800g User’s Guide
When Check Character is set to Validate, but Don’t Transmit , the unit will only
read Codabar bar codes printed with a check character, but will not transmit the
check character with the scanned data.
Codabar Concatenation
Codabar supports symbol concatenation. When you enable concatenation, the
imager looks for a Codabar symbol having a “D” start character, adjacent to a
symbol having a “D” stop character. In this case the two messages are
concatenated into one with the “D” characters omitted.
Default = Off.
Select Require to prevent the imager from decoding a single “D” Codabar symbol
without its companion. This selection has no effect on Codabar symbols without
Stop/Start D characters.
* No Check Character
Validate Modulo 16 and Transmit
Validate Modulo 16, but
Don’t Transmit
A12D D34A
Codabar
Character Stop Start Stop Start
On
* Off
Require