HP 3162 - Manual (Page 126)

Configuration Options
C-28 3162-A2-GB20-40 August 2000
General SNMP Management Configuration Options
Table C-13. General SNMP Management Configuration Options
SNMP Management: Disable
Enable Disable
Specifies whether the DSU/CSU responds to SNMP session requests.
Enable – The DSU/CSU responds to SNMP session requests.
Disable – The DSU/CSU does not respond to SNMP session requests.
Community Name 1: Text Field
Text Field Clear
Specifies the first of two community names that are allowed to access this unit’s
Management Information Base (MIB). External SNMP managers must supply this name
to access an object in the MIB.
Text Field – Allows you to edit or display the first community name.
Clear – Allows you to clear the first community name.
Name 1 Access: Read
Read Read/Write
Specifies the type of access allowed for Community Name 1. This is the type of access
allowed for external SNMP managers accessing objects in the MIB using Community
Name 1.
Read – Allows read-only access (SNMP Get) to the accessible objects in the MIB for
this device if community name 1 is used. This includes all objects specified as either
read-only or read/write in the MIB RFCs.
Read/Write – Allows read and write access (SNMP Get and Set) to the objects in the
MIB for this device if community name 1 is used. Write access is allowed for all objects
specified as read/write in the MIB RFCs. Read access is allowed for all objects
specified as either read-only or read/write.
Community Name 2: Text Field
Text Field Clear
Specifies the second of two community names that are allowed to access this unit’s
Management Information Base (MIB). External SNMP managers must supply this name
to access an object in the MIB.
Text Field – Allows you to edit or display the second community name.
Clear – Allows you to clear the second community name.
Name 2 Access: Read
Read Read/Write
Specifies the type of access allowed for Community Name 2. This is the type of access
allowed for external SNMP managers accessing objects in the MIB using Community
Name 2.
Read – Allows read-only access (SNMP Get) to the accessible objects in the MIB for
this device if community name 2 is used. This includes all objects specified as either
read-only or read/write in the MIB RFCs.
Read/Write – Allows read and write access (SNMP Get and Set) to the objects in the
MIB for this device if community name 2 is used. Write access is allowed for all objects
specified as read/write in the MIB RFCs. Read access is allowed for all objects
specified as either read-only or read/write.