HP 3162 - Manual (Page 131)

Configuration Options
C-33 3162-A2-GB20-40 August 2000
Configuration Worksheets
This section contains one set of blank worksheets to be used when configuring
your DSU/CSU using the async terminal interface. In the tables, default settings
for Factory 1 are indicated by bold type. It is recommended that you copy these
blank worksheets before using them.
Network Interface Options Value (Default in Bold)
Line Framing Format D4, ESF
Line Coding Format AMI, B8ZS
Bit Stuffing 62411, Disable
Line Build Out (LBO) 0.0, –7.5, –15, –22.5
Management Link Enable, Disable
ANSI Performance Report Mes-
sages Enable, Disable
Network Initiated LLB Enable, Disable
Network Initiated PLB Enable, Disable
Circuit Identifier Text Field, Clear
DTE Interface Options Value (Default in Bold)
Interface Status Enable, Disable
Line Framing Format D4, ESF
Line Coding Format AMI, B8ZS
Line Equalization 0 –133, 133 –266, 266 –399, 399 –533, 533 –655
DTE LB on External Contact Enable, Disable
Send All Ones on DTE Failure Enable, Disable