HP 3162 User Manual
Acculink, 3162 dsu/csu
Advertising
Table of contents
Document Outline
- Contents
- About This Guide
- Introduction
- Installation
- Operation
- Configuration
- Overview
- Setting Customer Identification
- Configuring the 10BaseT Port
- Configuring the COM Port for SNMP or Telnet Access
- Configuring DS0 Channels
- Displaying DS0 Channel Assignments
- Allocating DS0 Channels from the DTE Drop/Insert Interface to the Network Interface
- Configuring DS0 Channels for Robbed Bit Signaling
- Allocating Data Ports Using the Block or ACAMI Assignment Method
- Allocating Data Ports Using the Individual Channel Assignment Method
- Clearing DS0 Channel Allocation
- Establishing Access Security on the COM Port
- Setting a Password
- Selecting the Timing Source
- Providing Backup Capability
- Monitoring and Testing
- Asynchronous Terminal Menu
- Technical Specifications
- Configuration Options
- Overview
- Network Interface Configuration Options
- DTE Interface Configuration Options
- Sync Data Port Configuration Options
- Cross Connect Configuration Options
- General Configuration Options
- User Interface Configuration Options
- Alarm and Trap Configuration Options
- Management and Communication Configuration Options
- Configuration Worksheets
- Pin Assignments
- SNMP MIB Objects
- IP Network Addressing Scenario
- Equipment List
- Glossary
- Index