Document Outline

• Contents
• About This Guide
  • Document Purpose and Intended Audience
  • Document Summary
  • Product-Related Documents
  • Reference Documents
• Introduction
  • Overview
  • Features
    • DTE Drop/Insert (DSX-1) Interface
    • Asynchronous Terminal Interface Support
    • Alarm Message Capability
    • Telnet Access
    • SNMP Management Support
  • Physical Description
• Installation
  • Overview
  • Application Examples
  • SNMP or Telnet Connection Examples
  • Important Instructions
  • Cabling Example
  • Power-On Self-Test
• Operation
  • Overview
  • Front Panel LEDs
  • Initiating an Asynchronous Terminal Session
  • Ending an Asynchronous Terminal Session
  • Recovering Asynchronous Terminal Operation
  • Menu Organization
  • Using Asynchronous Terminal Screens
  • Entering a Password to Gain Access
  • Displaying LED Conditions
  • Changing Configuration Options
    • Displaying or Editing Configuration Options
    • Saving Edit Changes
• Configuration
  • Overview
  • Setting Customer Identification
  • Configuring the 10BaseT Port
  • Configuring the COM Port for SNMP or Telnet Access
    • Configuring the COM Port for Management
    • Setting the IP Address
    • Selecting the Link Layer Protocol
  • Configuring DS0 Channels
    • Displaying DS0 Channel Assignments
    • Allocating DS0 Channels from the DTE Drop/Insert Interface to the Network Interface
    • Configuring DS0 Channels for Robbed Bit Signaling
    • Allocating Data Ports Using the Block or ACAMI Assignment Method
    • Allocating Data Ports Using the Individual Channel Assignment Method
    • Clearing DS0 Channel Allocation
  • Establishing Access Security on the COM Port
  • Setting a Password
  • Selecting the Timing Source
  • Providing Backup Capability
• Monitoring and Testing
  • Overview
  • Self-Test Results
  • Device Health and Status
  • Performance Reports
  • Ethernet Statistics
  • IP Routing Table
  • Alarms
  • SNMP Traps
  • Troubleshooting
  • Test Jacks
  • Test Commands
  • Remote Loopback Tests
    • Sending a Line Loopback Up or Down
    • Sending a V.54 or ANSI FT1 Activation/Deactivation Sequence
  • Local Loopback Tests
    • Starting a Line Loopback
    • Starting a Payload Loopback
    • Starting a DTE Loopback
    • Starting a Repeater Loopback
    • Starting a Data Channel Loopback
    • Starting a Data Terminal Loopback
    • Aborting Loopbacks
  • Test Patterns
    • Sending Network QRSS or Network 1-in-8 Test Patterns
    • Sending Port QRSS or Port 511 Test Patterns
    • Monitoring Network QRSS Test Patterns
    • Monitoring Port QRSS or Port 511 Test Patterns
    • Aborting Test Patterns
  • Lamp Test
    • Starting a Lamp Test
    • Aborting a Lamp Test
  • Displaying DSU/CSU Test Status
• Asynchronous Terminal Menu
• Technical Specifications
  • Overview
• Configuration Options
  • Overview
  • Network Interface Configuration Options
  • DTE Interface Configuration Options
  • Sync Data Port Configuration Options
  • Cross Connect Configuration Options
    • DTE-to-Network Assignment Options
    • Sync Data Port Assignment Options
  • General Configuration Options
  • User Interface Configuration Options
    • Communication Port Configuration Options
    • External Device Configuration Options
    • Telnet Sessions Configuration Options
    • Ethernet (10BaseT) Port Configuration Options
  • Alarm and Trap Configuration Options
  • Management and Communication Configuration Options
    • Communication Protocol Configuration Options
    • General SNMP Management Configuration Options
    • SNMP NMS Security Configuration Options
    • SNMP Traps Configuration Options
  • Configuration Worksheets
• Pin Assignments
  • Overview
  • T1 Network Interface
  • DTE Drop/Insert Interface
  • 10BaseT Connector
  • COM Port Interface
  • Serial Crossover Cable
  • EIA-530-A Port Interface Connector
  • EIA-530-A-to-RS-449 Adapter
  • EIA-530-A-to-V.35 Adapter
  • EIA-530-A-to-X.21 Adapter
  • External Clock Interface
• SNMP MIB Objects
  • Overview
  • MIB II (RFC 1213)
    • System Group, MIB II
    • Interface Group, MIB II
    • IP Group, MIB II
    • ICMP Group, MIB II
    • TCP Group, MIB II
    • UDP Group, MIB II
    • Transmission Group, MIB II
    • SNMP Group, MIB II
  • DS1/E1 MIB (RFC 1406)
    • Near End Group, DS1/E1 MIB
    • Far End Group, DS1/E1 MIB
    • DS1 Fractional Group, DS1/E1 MIB
  • RS-232-like MIB (RFC 1317)
    • General Port Table, RS-232-like MIB
    • Asynchronous Port Table, RS-232-like MIB
    • Synchronous Port Table, RS-232-like MIB
    • Input Signal Table, RS-232-like MIB
    • Output Signal Table, RS-232-like MIB
  • Generic-Interface MIB Extensions (RFC 1229)
    • Generic Interface Test Table, Generic Interface MIB
  • Enterprise MIB
• IP Network Addressing Scenario
  • Overview
  • Standalone at the Central Site
  • Local Carrier with Remote Standalone
  • Local and Remote Carriers — Different Subnets
  • Local and Remote Carriers — Same Subnet
  • Multiple NMSs
• Equipment List
• Glossary
• Index