HP 330 - Manual (Page 37)

1–23
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 1–23 (seq: 37)
This is the black on page 1–23 (seq: 37)
5 Follow the instructions on the
Setup Sheet. Having marked the
ovals to change the settings, reload
the sheet in the plotter, printed side
down, with the large arrow pointing
into the plotter
The plotter reads your marks and
reconfigures itself automatically.
Ready
When the Ready light comes on,
press Setup again.
Setup
6 When the Load Media light comes on
again, remove the sheet and make sure
that the plotter has marked your
selection with a check mark.
Load Media
1751b
7 Please store this latest copy of the Setup Sheet with the Quick Reference Guide in
the plastic pocket at the side of the plotter, so that a service engineer would know
the current configuration even if the plotter is inoperable.
Localization Note JKCT: Similar to parrot UG p 1–29.
SETUP
1
Setting up your plotter
Task 8 (optional): Configure the plotter